Advanced Features of 2 in 1 Metal sheet decoiler and straightener
Share to : 
Advanced Features of 2 in 1 Metal sheet decoiler and straightener - Straightener Head, Control Panel, Pneumatic Press Arm, Straightening Roller, and Electric Control Box.
1.Straightener Head
●Adopt parallel roller design, 3 up / 4 down, totally 7 rollers.
●Adopt four point fine adjustment is adopted, which is more suitable for processing high-precision products.
●Adopt four point independent pressure to adjust the pressure of feeding roller for entrance and exit, which can prevent material deviation and deformation effectively.
●The supporting roller adopts the galvanizing roller without power, the material is one body formed, the surface is scratch-resistant and wear-resistant, use the mechanical bearing, rotating flexible and durable.
●Handwheel made of cast iron, surface is electroplated.
●The transmission part is protected by protective cover on both sides, equipped with observation window for easy viewing.
2.Control Panel
●User-friendly control panel make it easier to operate the machine, also reduce downtime.
3.Electric Control Box
●Adopt silver alloy relay ,full copper coil ,flame retardant safety base, long lasting and durable.
●Adopt safety protection adjustment circuit time delay ,silver alloy contact ,various and dial, satisfied different delay ranges.
●The switch adopts sliding contact ,with self-cleaning function , normally open and normally closed contact adopts separate bonding structure, can work with different poles, equipped with anti-rotation positioning and stop loose mounting gasket.
●Adopt self-duplex flat button, the force is light, the key range is moderate, the building block type combination structure. The contact is made up of keto-base composite points with strong conductivity and large current, with a life span of up to 1 million times.
4.Pneumatic Press Arm（Optional）
●The pneumatic press arm keep pressing on the sheet metal while feeding, prevents coil from loosening.
●The wheel of press arm is coated with PU, which wouldn't scratch the surface of metal strip.
5.Straightening Roller
●The straightening rollers are made of solid bearing steel, to ensure material durability.
8years foriegn trade experience Easily grasp customer needs Keeping good relationship with customers
